涂裝是鋁板制造中比較重要的工序，涂裝質量的好壞，直接影響了鋁板的裝修效果．形成鋁板涂裝好壞的要素主要有四點，下面就讓咱們鋁板廠家來帶我們了解一下這方面的內容吧．對這方面感興趣的朋友必定不能錯過．
Coating is an important process in the manufacture of aluminium sheet. The quality of coating directly affects the decoration effect of aluminium sheet. There are four main factors to form the coating quality of aluminium sheet. Let's let the aluminium sheet manufacturer take us to understand the content of this aspect. Friends who are interested in this aspect must not miss it.
１、環境
1, environment
要求涂裝室內部清潔潔凈，做到防塵、防蟲和必定的通風功能，保證鋁板涂裝表面質量不受污染．同時因為氣溫變化而及時更改工藝條件．
It is required that the interior of the painting room be clean, dust-proof, insect-proof and certain ventilation functions, so as to ensure that the surface quality of the aluminium sheet coating is not polluted. At the same time, the process conditions are changed in time because of the change of temperature.
２、原材料
2. Raw materials
涂料和鋁板是涂裝過程中較能影響涂裝質量的要素，因為涂料的批次之間存在色差，涂料細度不夠而涂覆率不高，涂料與溶劑配合欠安、分層等等會直接影響涂裝效果而產生缺陷＇鋁卷基材的不平坦、膜厚不均勻、邊部撓曲度欠安等也直接影響產品質量和整體使用．因此，在選擇原材料時，應嚴格操控．
Coatings and aluminium sheets are the most important factors affecting the quality of coatings in the process of painting. Because of the color difference between batches of coatings, the fineness of coatings is insufficient and the coating rate is not high. The improper coordination and stratification of coatings and solvents will directly affect the coating effect and result in defects. Therefore, the selection of raw materials should be strictly controlled.
３、設備
3, equipment
涂裝線要求涂裝設備完好，涂裝設備要求工作平穩，不能有橫、縱向抖動，涂裝輥要求研磨細膩．涂裝機所有輥子橫向跳動，必須操控在答應規模內，否則將嚴重影響涂層表面質量．
Coating line requires that the equipment is in good condition, the equipment should work smoothly, there should be no horizontal and vertical jitter, and the coating rollers should be polished delicately. All rollers of the coating machine must be controlled in the allowable scale, otherwise the surface quality of the coating will be seriously affected.

４、工藝
4. Craft
涂裝工藝對涂裝的質量關系密切，要求對涂裝輥、提漆輥、計量輥和基材相對線速比率操控在必定的規模內．要根據不同的體系和涂裝產品的膜厚，對涂料設定必定的粘度規模，保證涂裝順利進行，促進產品質量的進步．涂料的固化工藝，烘箱操控必須按要求操控，不得任意變化，否則將嚴重影響涂裝產品的色差和功能．
Painting process is closely related to the quality of painting, requiring that the relative linear velocity ratio of painting roll, painting roll, measuring roll and base material be controlled in a certain scale. According to different systems and film thickness of coating products, a certain viscosity scale should be set for coating to ensure smooth painting and promote the progress of product quality. The curing process of coating and oven control must be controlled according to requirements. No arbitrary change is allowed, otherwise the chromatic aberration and function of the coated products will be seriously affected.
以上內容就是鋁板廠家為您介紹的關于鋁板涂裝好壞要素的內容介紹，相信無論是對與這方面的理解還是整個鋁板的知道都有協助
The above content is about the aluminium sheet manufacturer's introduction about the elements of aluminium sheet painting. I believe that both the understanding and the knowledge of the whole aluminium sheet will be helpful.
以上信息是我們鋁板生產廠家整理發布希望對大家有所幫助我們的網站是：http://m.texjob.com.cn！
The above information is our aluminium plate manufacturer's collation and publication hope to help you with our website is: http://m.texjob.com.cn!